New Key for a 1951 Chevrolet Truck in Summerville, SC

New Key for a 1951 Chevrolet Truck in Summerville, SC

A 1951 Chevrolet gets a new key from the Summerville Locksmith team

Most of the keys we make are for cars built in the last twenty years. Every so often a classic comes through the door, and a 1951 Chevrolet truck is one of those jobs. Recently, our team made a new key for one. This post explains how keys for older vehicles differ from the ones in a modern car, what we look at on a job like this, and what to know if you own a classic truck or car that needs a key.

The job: a new key for a 1951 Chevrolet

The owner needed a new key for a 1951 Chevrolet truck. Our team handled the key work, and you can see the truck in the photo that goes with this post. Every vintage vehicle is a little different, so we start by looking at what the truck has: the locks, the ignition and any key or code information that survives.

How keys for classic vehicles differ from modern keys

A vehicle from 1951 was built long before transponder chips, key fobs and push button start. In general, keys from that era are simple mechanical keys. That is good news in one way, because there is usually no chip to program. It can be harder in another way, because key blanks for old vehicles can be discontinued and the original lock may be worn after decades of use.

  • Mechanical keys. Older vehicles usually rely on the cut of the key alone to turn the lock.
  • Worn locks. A lock that has been used for decades may not turn smoothly, even with a fresh key.
  • Hard to find blanks. The original style of key blank may no longer be made, so a close equivalent may be needed.
  • More than one lock. The ignition, the doors and any other locks may use the same key or different keys. It is worth checking each one.

What we look at on a classic key job

1. The existing keys and locks

If any original key is left, even a worn one, it gives us a starting point. If no key is left, we look at the lock itself.

2. Whether the lock still works well

A new key will only work as well as the lock allows. If the ignition or a door lock is worn, we tell you before we start, so you know what to expect.

3. The right key blank

We look for a blank that matches the lock as closely as possible. When the original is no longer made, we explain what we are using instead.

4. Cutting and fitting the key

We cut the key and then test it in the lock, so you are not left with a key that almost works.

5. Testing every lock it should fit

We test the new key in the locks it is meant to work in before we hand it over.

Tips for owners of classic trucks and cars

  • Make a spare key as soon as you have a working one. Do not wait until the only key is lost.
  • Keep a spare in a safe place away from the vehicle.
  • Write down which key fits which lock, if your vehicle uses more than one.
  • If a lock feels rough or sticks, mention it when you call, because it can affect how the new key will perform.
  • Do not force a key that will not turn. Forcing it can break the key in the lock.

Questions to ask a locksmith before booking a classic key job

  • Have you made keys for vintage or older vehicles before?
  • Will you check the lock before you cut the key?
  • What happens if the lock is too worn for a new key to work well?
  • Will you test the key in every lock it should fit?

Frequently asked questions

Does a 1951 Chevrolet truck need a transponder key?

In general, vehicles from that era use simple mechanical keys with no transponder chip, so there is usually no chip to program. We check the vehicle in front of us before we say for sure.

What if I have no original key?

That is a common situation with older vehicles. We can look at the lock itself and talk through the options. What is possible depends on the lock and its condition.

Can a worn lock be fixed?

Sometimes a worn lock can be serviced. In other cases, the cylinder may need repair or replacement. We tell you what we find before doing any extra work.

Do you only work on newer cars?

No. We handle everyday car keys, key fobs, and older and classic vehicles. If you are unsure whether we can help, call and describe the vehicle.

Do you only work in Summerville?

We have two locations in Summerville, one in Berkeley County and one in Dorchester County, and we serve Summerville and the surrounding area.

Need a key for a classic or older vehicle?

Call the Summerville Locksmith location nearest you and tell us about the vehicle.

Berkeley County Locksmith
2139 N Main St #E, Summerville, SC 29486
(843) 920-3313

Dorchester County Locksmith
75 Old Trolley Rd Unit 1, Summerville, SC 29485
(843) 484-9897

summervillelocksmiths.com

Call (843) 920-3313